Teletask TDS13644 Manuel Technique page 348

Terminology
Control Tower
This is the equivalent of the GUI+ Runtime. This is the software in which an operator can monitor and control the
different connected Central Units.
Control Tower configurator
This is the equivalent of GUISOFT in PROSOFT. Within the 'Control Tower Configurator' the different Central Units are
defined, the audio messages for alarms are imported and the overview page with all the Central Units is created.
Control Tower configuration
This is the equivalent of the 'GUI Data'. It contains all information about the Central Units, the alarms and the
overview page. But instead of being part of a PROSOFT file, the Control Tower configuration is saved in a separate
Control Tower configuration file.
23/1/2018 Page 347
TELETASK ne peut pas être tenu responsable des potentielles erreurs dans les fiches techniques et dans la documentation technique.
Des changements dans les caractéristiques des produits peuvent être effectués à tout moment, sans préavis. ©, TELETASK, GENT