Teletask TDS13644 Manuel Technique page 353

time, this list will be empty).
Click the 'New' button to add a new Central Unit. You will see the window below:
A Central Unit is defined by a unique name for the Central Unit (e.g the number of the flat, the address of the house,
...), and the Url (or IP address) at which the Control Tower can connect to the Central Unit.
For a central unit there are two optional information fields:
Extra info
can be a (practical) unlimited amount of formatted text. Pictures can also be added to this field, the maximum size for
the pictures is 500x500 pixels, larger pictures will be scaled while maintaining aspect ratio. This field can be visualized
in 'Control Tower' on top of the main screen. Optionally the control tower operator can modify information in this
field during normal operation. This information field is saved as a RTF file (Rich Text Formatting). These RTF files can
also be created in external programs (like Word). These files are stored at C:\ProgramData\TELETASK\Control
Tower\DoipInfo with the previously defined 'Central unit name' as filename.
It's advised that the externally created RTF files are smaller than 5MB. Files larger than 10MB will not be loaded
in the Control Tower.
At the bottom there is also information about whether the Control Tower configurator has already downloaded the
Control Tower Data for that Central Unit. When defining a new Central Unit this will always be 'not downloaded'.
When finished click 'OK' to add a Central Unit with the given data. You will now return to the overview list and the
23/1/2018
TELETASK ne peut pas être tenu responsable des potentielles erreurs dans les fiches techniques et dans la documentation technique.
Des changements dans les caractéristiques des produits peuvent être effectués à tout moment, sans préavis. ©, TELETASK, GENT
Page 352