Teletask TDS13644 Manuel Technique page 357

Now the Central Units and alarms are defined, the actual Control Tower configuration can be done. The first step is to
set some general Control Tower settings. To do so, click the 'Overview Page' item in the 'Edit menu' or click the Edit
button at the bottom of the page.
If you already have configured a GUI+, the settings on this page will look very familiar:
Target device resolution
the screen resolution of the device on which the actual Control Tower will run.
Run Control Tower full screen
whether the Control Tower needs to run full screen or in window mode
Audio feedback on touch/click
whether a sound needs to be played when an item in the Control Tower is touched / clicked.
Extended alarm/central unit info is editable by Control Tower Operator
Enable this if the operator may change the Extra Info of the alarms and central units.
23/1/2018 Page 356
TELETASK ne peut pas être tenu responsable des potentielles erreurs dans les fiches techniques et dans la documentation technique.
Des changements dans les caractéristiques des produits peuvent être effectués à tout moment, sans préavis. ©, TELETASK, GENT