Teletask TDS13644 Manuel Technique page 355

For this alarm, you cannot change the name, nor can you define an alarm type, but you can set two lines of text for
the alarm and browse for a corresponding audio message.
If no audio message is defined for this alarm, the Control Tower will not give any audible feedback about this alarm.
For other alarms (the ones coming from a Central Unit) the 'Define alarm' window looks like:
For these alarms you can define:
Alarm name
This name is purely a description of the alarm and is only used in the Control Tower configurator; it will not appear in
the Control Tower itself.
23/1/2018 Page 354
TELETASK ne peut pas être tenu responsable des potentielles erreurs dans les fiches techniques et dans la documentation technique.
Des changements dans les caractéristiques des produits peuvent être effectués à tout moment, sans préavis. ©, TELETASK, GENT