Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Visit www.butlertechnik.com for more technical information and downloads.
Air Top 2000
12.4. Control element connection
The wiring harness is (mechanically) prepared for connection to the
setpoint generator.
Simply pull on connector housing to unplug the connector.
The connector housing can be locked (self-locking action) by simply
pulling on the wiring harness.
NOTE:
The fibre optic cable must be in contact with the rotary knob.
NOTE:
As an option an external temperature sensor may be installed in the
passenger cabin (see page 48).
Fig. 26: Control element
Fig. 27: Installation of the control element
Fig. 28: Installation of the control element (incorrect)
www.butlertechnik.com
Electrical connections
61
Publicité
Table des Matières
