Visit www.butlertechnik.com for more technical information and downloads.
Exhaust pipe
Air Top 2000
10
Exhaust pipe
Rigid pipes of unalloyed or alloyed steel with a minimum wall thickness
of 1.0 mm or flexible piping of alloyed steel only must be used as
exhaust line.
The exhaust pipe is secured to the heater using a clamping collar, for
example. See the statutory regulations for other requirements.
Fig. 18: Exhaust silencer
Flow direction (arbitrary)
The exhaust silencer should ideally be installed near the heater.
The heater may also be operated without a silencer.
56
www.butlertechnik.com