Operating Elements And Connections; Applications; Conformity And Approval - IMG STAGELINE TXS-862HSE Mode D'emploi

All operating elements and connections de -
GB
scribed can be found on the fold-out page 3.
1 Operating Elements
and Connections
1 LC display to indicate the group (
channel and the battery status in 4 levels
2 On / off switch
3 Input (mini XLR, 3 poles) to connect an electret
microphone, e. g. headband microphone or ear-
band microphone
4 Button SET
to activate the setting modes one after another
group (keep button pressed for a while)
→ channel → sensitivity →automatic fre-
quency matching → identification number
→ lock function
and to confirm the settings
Note: When the lock function has been activated [indi-
cation when you press a button or use the switch
(2)], you will only be able to activate the setting mode
for the lock function (
5 Button – to make settings in the different setting
modes:
– to search in descending order when selecting
the group, the channel and the identification
number
– to decrease the sensitivity
– to disable the automatic frequency matching
(REMOSET function)
– to deactivate the lock function
6 Button + to make settings in the different setting
modes:
– to search in ascending order when selecting
the group, the channel and the identification
number
– to increase the sensitivity
– to enable the automatic frequency matching
(REMOSET function)
– to activate the lock function
7 Buttons to unlock the battery compartment
cover (8): press the buttons firmly and fold up
the cover
8 Battery compartment cover
9 on the rear: Rotary switch to attenuate the level
(6 dB or 20 dB), adjustable with the small screw-
driver provided
8
...
chapter 5.1.5).
2 Important Notes
This unit corresponds to all relevant directives of
the EU and is therefore marked with
G
The unit is suitable for indoor use only. Protect it
against dripping water and splash water, high air
humidity and heat (admissible ambient tempera-
, the ture range: 0 – 40 °C).
)
G
For cleaning only use a dry, soft cloth; never use
water or chemicals.
G
No guarantee claims for the unit and no liability
for any resulting personal damage or material
damage will be accepted if the unit is used for
other purposes than originally intended, if it is not
correctly operated, or if it is not repaired in an
expert way.
If the unit is to be put out of operation
definitively, take it to a local recycling plant
for a disposal which is not harmful to the
environment.

3 Applications

The pocket transmitter TXS-862HSE is designed
for connection of an electret microphone with
3-pole mini XLR output, e. g. headband micro-
phone or earband microphone. It is suitable for
transmission in the UHF range 740 MHz to 776 MHz
and for operation with the following receivers from
"img Stage Line":
– TXS-852 with one receiver unit
– TXS-862 with two receiver units
The transmitter with the microphone connected
and the receiver create a wireless audio transmis-
sion system. The transmission channel is selected
from 6 channel groups of different size; the largest
group contains 22 preset channels. The transmis-
sion range depends on local conditions; in free field
it may reach a maximum of 300 m.
The REMOSET function of the system will auto-
matically match the frequency between the trans-
mitter and the receiver unit.

3.1 Conformity and approval

Herewith, MONACOR INTERNATIONAL declare
that the unit TXS-862HSE is in accordance with the
basic requirements and the other relevant regula-
tions of the directive 1999 / 5 / EC. The declaration
of conformity can be found on the Internet via
the home page of MONACOR INTERNATIONAL
(www.imgstageline.com).
.