Frequently Asked Questions (Faq) - Nyne NH-6000 Manuel Utilisateur

6 Frequently asked
questions (FAQ)
Never try to repair the device yourself
as you may void your warranty. When
you encounter any problems, read the
FAQ before you take the device for
repair. You may also visit www.nyne.
com/support for help.
Contact your dealer if any of the
following occurs:
• The power cord frays or fails.
• Liquid sprays or any object drops
into the device.
• The device is exposed to rain or
other moisture.
• The device is dropped or
damaged in any way.
• The performance of the device
changes substantially.
Why is there no power?
•
Check whether you have
connected the power cord to the
wall socket securely.
•
Check whether the mains power is
interrupted.
•
Check whether you have turned
the
the back of the device to the
position.
Why is there no sound or only distorted sound?
•
Press
control (or tap
top panel) repeatedly to adjust
volume.
•
Press
remote control repeatedly to adjust
the bass or treble level.
22 EN
NYNE NH-6000_User Manual_A5.indb 22
Why is there no picture or only distorted picture on the
switch on
TV?
on the remote
on the
or
on the
•
Check whether the sound output is
muted. Press
remote control to resume sound
output.
•
Make sure that you have selected
an audio source for play.
•
If you have selected the dock
source, check whether you have
docked your iPod/iPhone/iPad
securely. If you have a protective
case on your iPod/iPhone/iPad,
remove it and try again.
•
If you have selected the Bluetooth
source, check whether the
Bluetooth connected device
supports Bluetooth profile A2DP.
Check the user manual of the
device for details.
•
If you have selected the Bluetooth
source, check whether wireless
connection has been set up
between the paired device and
NH-6000.
•
If you are listening from an auxiliary
device, check the following points:
•
Make sure that you have
started music play on your
auxiliary device.
•
Try to adjust volume on your
auxiliary device.
•
Check whether the RCA-to-
3.5mm audio cable has been
connected securely to both the
Bluetooth docking speaker and
auxiliary device.
•
Check whether you have
connected the composite video
cable or S-Video cable to both the
device and TV.
•
Check whether the TV is turned on.
•
Check whether you have selected
the correct video input source on
the TV.
on the
5/17/2012 9:30:36 PM