Nyne NH-6000 Manuel Utilisateur page 20

7
A. If you have selected "BUZZ" as
the alarm source, press
the remote control to confirm the
set alarm timer directly.
B. If you have selected "iPod" as
the alarm source, press
the remote control (or tap
on the top panel) repeatedly to
select the alarm volume, and then
press
alarm timer.
The LED screen returns to normal
+
clock display.
The indicator on the top panel
+
lights up.
To deactivate the alarm timer:
• Select "OFF" at step 3 in the
above, and then press
the remote control to confirm.
The indicator on the top panel
+
dims out.
Tips:
•
If you have selected dock as the
alarm source but there is no iPod/
iPhone/iPad docked at the preset
alarm time, you will be woken up
with the built-in buzzer instead
automatically.
•
During alarm timer setting, if there is
no operation within six seconds, the
current settings will be cancelled.
•
When the set alarm rings, you can
tap any button on the front panel
or press any button except
the remote control to snooze for an
interval of nine minutes.
•
When a set alarm rings, you can
press on the remote control to
stop alarm ringing. The set alarm will
ring again the next day.
20 EN
NYNE NH-6000_User Manual_A5.indb 20
on
on
to confirm the set
on
on
•
If you have selected dock as the
alarm source, when the set alarm
rings, you can remove your iPod,
iPhone or iPad from the dock to
stop alarm ringing. The set alarm will
ring again the next day.
5/17/2012 9:30:36 PM