Operation; Use Basic Volume Controls; Play And Charge Your Ipod/ Iphone/Ipad Through The Device - Nyne NH-6000 Manuel Utilisateur

4 Operation

Use basic volume controls

You can use the basic volume controls
in any audio input mode, such as
dock/3.5mm audio input, Bluetooth,
and AUX.
• Press
control (or tap
top panel) repeatedly to adjust
volume.
The current volume level is
+
displayed on the LED screen.
• Press
remote control repeatedly to
adjust the bass level.
The current bass level is displayed
+
on the LED screen.
• Press
the remote control repeatedly to
adjust the treble level.
The current treble level is displayed
+
on the LED screen.
• If the current volume is higher than
10dB, press
remote control once to decrease
the volume to 10dB, press twice to
mute sound output, and press a
third time to resume sound output.
• If the current volume is 10dB or
lower, press
remote control once to mute
sound output, and press again to
resume sound output
14 EN
NYNE NH-6000_User Manual_A5.indb 14
on the remote
on the
on the
on
on the
on the
.
Play and charge your iPod/
iPhone/iPad through the device
You can play and charge the
following iPod, iPhone, and iPad
models through this device:
Made for.
• iPad 2
• iPad
• iPhone 4S
• iPhone 4
• iPhone 3GS
• iPhone 3G
• iPod nano (3rd, 4th, 5th, and 6th
generation)
• iPod touch (3rd, and 4th
generation)
Notes:
•
If you have a protective case on
your iPod/iPhone/iPad, you may
need to remove it first.
•
Make sure that no cable is
connected to the 3.5mm audio
input socket on the top panel
of NH-6000. The device switches
to 3.5mm audio input mode
automatically when the 3.5mm
audio input socket is used.
5/17/2012 9:30:33 PM