Preparation; Unpack; Connect Power; Get The Remote Control Ready For Use - Nyne NH-6000 Manuel Utilisateur

3 Preparation

Unpack

Unpack and identify the items of your
package.
•
1 x Bluetooth docking speaker
•
1 x remote control
•
1 x CR2025 button cell battery
•
1 x RCA-to-3.5mm audio cable
•
1 x composite video cable (yellow)
•
1 x User Manual
•
1 x Quick User Guide
•
1 x warranty card

Connect power

Warning:
•
Make sure that the power supply
voltage is within the range
indicated on the rating label at the
back of the device.
•
If you need other connections
(such as the audio and video
connection), complete these
connections before power
connection.
12 EN
NYNE NH-6000_User Manual_A5.indb 12
Connect the power plug to the wall
socket.
Get the remote control ready for
use
Warning:
•
To reduce the risk of explosion,
keep batteries away from heat,
sunshine, or fire.
•
To reduce the risk of damage,
remove the battery when the
remote control is not to be used for
a long period of time.
1
Pull out the battery loader.
2
Load the supplied button cell
battery (type: CR2025) with correct
polarity.
3
Push back the battery loader
securely.

Turn on the device

1
Turn the
on the back of the device to the
position.
You can hear a beep from the
+
device.
The four touch buttons (
+
and ) on the top panel of
the device light up.
switch
,
5/17/2012 9:30:32 PM