Starting And Stopping; Operating Tips - CERTIFIED 060-0581-2 Guide D'utilisation

15
model no. 060-0581-2
2. Insert the loop through the opening in the
back of the upper handle and secure the
loop onto the extension cord hook (Fig. 6).
3. Connect the extension cord to the snow shovel cord.
NOTE: Securing the extension cord in this way helps to prevent you from accidentally disconnecting
the extension cord from the snow shovel during operation.
4. Plug the extension cord into a wall outlet.
5. Keep the area to be cleared free of stones, toys or other foreign objects that the rrotating
paddles might pick up and throw. Such items could be covered by snow and are easy to
overlook, so be sure to conduct a thorough inspection of the area before operating the snow
shovel.

Starting and Stopping

1. To start the electric snow shovel, push
and hold the safety lock button on the top
of the handle grip with your thumb and
then squeeze the trigger switch with your
fingers. Once the machine powers on, you
can release the safety lock button and
proceed with operation (Fig. 7).
2. To stop the electric snow shovel, release the
trigger switch (Fig. 7).

Operating Tips

• Start the electric snow shovel and tilt it forward until the scraper blade at the base of the unit
contacts the ground. Push the shovel forward at a comfortable rate, yet slow enough to clear
the path completely. The clearing width of the snow shovel and the depth of snowfall should
dictate your forward speed.
• Direct the snow discharge to the right or to the left by holding the electric snow shovel at a
slight angle.
I contact us: 1-844-428-7277
Fig.6
Upper handle
Extension cord hook
Extension cord
Snow shovel cord
Fig.7
Safety lock button
Trigger switch