Assembly - CERTIFIED 060-0581-2 Guide D'utilisation

13
model no. 060-0581-2

ASSEMBLY

CAUTION! Read complete INSTRUCTION MANUAL before operating this machine.
Unpacking
Carton contents
• Electric snow shovel
• Joint-fixing knob and bolt X1
• Adjustable handle and knob X1
• Manual
1. Carefully remove the electric snow shovel and check to see that all of the above items are
supplied.
2. Inspect the product carefully to make sure no breakage or damage occurred during shipping.
NOTE: Do not discard the shipping carton and packaging material until you are ready to use your new
electric snow shovel. The packaging is made of recyclable materials.
Properly dispose of these materials in accordance with local regulations.
IMPORTANT! The equipment and packaging material are not toys. Do not let children play with plastic
bags, foils or small parts. These items can be swallowed and pose a suffocation risk!
Assembly
Connecting the Upper and Lower Tubes
1. Fit the upper and lower tubes together and
tighten the joint-fixing knob (Fig. 1).
2. Assemble the adjustable handle and tight the
handle knob (fig 2 ).
NOTE: the tip on the lower clip shall be
inserted to the solt on the upper tube.
I contact us: 1-844-428-7277
X1
X1
Fig.2
Fig. 1
Upper tube
Lower tube
Fig.3