Protective Equipment - Pro-Point 8871444 Instructions

VI .O
INTRODUCTION
The Soldering
control of the temperature
displays Celsius temperature.
SAFETY
WARNING! Read and understand
tool. The operator
risk of personal
Keep this manual for safety warnings,
inspection and maintenance
WORK AREA
1. Operate in a safe work environment.
well lit and free of distractions.
in a shadow.
2. Keep anyone not wearing the appropriate
from the work
3. Store tools properly
the reach
4. Do not install or use in the presence
liquids.
PERSONAL
WARNING! Wear personal
Canadian Standards
Standards Institute
PERSONAL
Always wear impact safety goggles that provide front and side
1.
protection
with CSA Z94.3-07
work performed.
2. Wear gloves that provide protection
to reduce
3. Wear protective
tool.
Visit www.princessauto.com
Soldering Iron Station with Temperature
Iron Station with Temperature
at the soldering
must follow
injury and/or
instructions.
area.
in a safe and dry location.
of children.
SAFETY
protective
Association
(ANSI).
PROTECTIVE
for the eyes. Eye protection
or ANSI Z87.1 standards
the effects of tool
clothing designed
for more information
Control allows precision
iron tip. The tool only
all instructions
basic precautions
damage to the equipment.
precautions,
Keep your work area clean,
Place lights so you are not working
safety equipment
of flammable
equipment
(CSA) or American
EQUIPMENT
equipment
based on the work materials
vibration.
for the work environment
Control
before using this
to reduce
operating or
Keep tools out of
gases, dust or
approved
National
should comply
based on the type of
8871444
the
away
by the
or
and
3