PRO-POINT 8871444 Instructions page 4

8871444
PERSONAL
Control the tool, personal movement
personal injury or damage to the tool.
1. Do not operate any tool when tired or under the influence of drugs,
alcohol or medications.
2. Do not overreach when operating the tool. Proper footing and
balance enables better control in unexpected
SPECIFIC
WARNING! DO NOT let comfort
from repeated
If you use this tool unsafely
personal injury.
1. Use the correct tool for the job. This tool was designed
specific function.
unintended
2. Do not use the tool if any parts are damaged,
Repair or replace the parts.
3. Always keep fingers, hands, body and clothing
components
The tool will remain hot for a few minutes after use. Always rest the
4.
tool on a stand where heat from the tool cannot damage
items.
5. Do not touch the soldering
material until it has time to cool. This tool generates
heat and can inflict a burn injury and/or
use.
6. Do not obstruct
heat build-up and may cause the tool to fail.
7. Never file the soldering
Make sure to have sufficient ventilation
8.
solder flux
4
Soldering Iron Station with Temperature
PRECAUTIONS
SAFETY PRECAUTIONS
use) replace strict
or incorrectly,
Do not modify or alter this tool or use it for an
purpose.
of this tool.
the tool's
iron's specially plated tip.
can be harmful.
and the work environment
or familiarity
adherence
you can suffer
iron tip or place it on a combustible
damage
air intake. This
while soldering;
For technical
Control
situations.
with product
to the tool safety
for a
broken or misplaced.
away from heated
considerable
materials during
can lead to excessive
questions call 1-800-665-8685
to avoid
(gained
rules.
serious
nearby
solder or