JK-Products Ergoline EVOLUTION 660 TURBO POWER Instructions D'utilisation page 90

Error code Meaning
Cutout switch has tripped.
Monitor switched off by overheating protection.
Emergency switch-off time exceeded
I²C bus fault
Wiring or power fault in the safety chain
Correction
– Check safety chain:
1. 3 x temperature limiters for facial tanner filter
disks
2. Limit switch cover (canopy)
3. 3 x temperature limiters for facial tanner
4. Temperature limiter UV low pressure lamps
(canopy)
5. Temperature limiter UV low pressure lamps
(sunbed base)
Allow monitor to cool for approx. 2 hours. Then
restart MULTIVISION box.
89