Product Description; Installation - Mettler Toledo easyFlow Instructions D'utilisation

4

2. Product Description

The easyFlow housing serve as enclosures
for METTLER TOLEDO sensors used for pH,
redox, dissolved oxygen and conductivity
measurements, particularly in industrial
wastewater.
All parts of the housing in contact with the
process (wetted parts) are made of CPVC,
or PSU according to order specification.
O-rings in contact with the process medium
are made of Viton
The printed markings on each easyFlow
housing contain the following information:
A METTLER TOLEDO
Manufacturer
B Order No. 5X XXX XXX
Order number
C SNR: XXXXXXX serial number
D PS:/TS: Pressure and temperature
specifications
E Material: Type of material
(CPVC or PSU)
easyFlow
®
.
52 403 972

2.1 Installation

When installing 12 mm sensors with
Pg 13.5 ensure that the white (PTFE) wash-
er is positioned directly beneath the 12 mm
sensor head, with the tapered (chamfered)
face pointing downwards. Then follows the
O-ring.
Screw the sensor with Pg 13.5 thread hand-
tight into the housing. Put the housing into
the T-piece.
Connect the cable socket to the sensor.
For the removal of the sensor, carry out the
above procedure in the reverse order.
The housing can be directly fixed to the pipe
by means of a bonding agent or by welding.
© 12 / 14 Mettler-Toledo AG, Printed in Switzerland
easyFlow