Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
GB
Setting up the Cleaning Schedule
[Fig. 12]
Press the schedule button.
Press the Left/Right buttons to select a day.
Press the Up/Down buttons to select or deselect that day, several days can be selected.
When all required days are selected, Press the Play/Pause button to set.
6JG JQWTU YKNN VJGP UVCTV CUJKPI 5GV VJG VKOG [QW YCPV VQ UVCTV VJG UEJGFWNGF ENGCPKPI 2TGUU VJG 7R
Down buttons to set the hours.
Press the Play/Pause button to set the hours.
6JG OKPWVGU YKNN VJGP UVCTV CUJKPI
Press the Up/Down buttons to set the minutes.
Press the Play/Pause button to set the minutes.
An audible signal is given from the robot signifying that the schedule has been set.
+H VJG CWFKDNG UKIPCN KU PQV IKXGP 2TGUU VJG #761
button on the robot, then press the schedule
button on the remote control.
6JG .'& QH VJG EQPVTQN NCOR CUJGU #V VJG UGV VKOG VJG ENGCPKPI RTQEGUU UVCTVU 6Q FGCEVKXCVG VJG
start time, press the Schedule button
for approx. 3 seconds. The Schedule symbol in the display of
the remote control turns off.
Setting Power Level
Press POWER LEVEL button
on the remote control to select the desired power level. Choose
between Normal Power
and Turbo Power
.
Setting Cleaning Mode
AUTO
: Press the on/ standby button on the device or the start/ pause button on the remote control
to start the cleaning process.
Robot will automatically choose the best cleaning mode to clean you room.
Fig. 12
PARALLEL: Press MODE button on the remote control for the robot to start cleaning under this
mode
.
SPOT: 2TGUU /1&' DWVVQP QP VJG TGOQVG EQPVTQN +V ENGCPU C KPVGPUKXGN[ EQP PGF CTGC HQNNQYKPI C
circular path
.
EDGE: Press MODE button on the remote control, It will automatically start cleaning along walls,
around furniture etc
.
MANUAL: The Robot can be controlled using the arrows on the remote control.
RETURN TO BASE: Press the button
on the remote control to send the robot to the charging
base. This mode can be activated during any cleaning cycle and the robot will automatically return to
the charging base.
When a cleaning cycle has been completed or the RQDQV U DCVVGT[ KU NQY VJG TQDQV YKNN CNUQ TGVWTP VQ
the charging base automatically.
WARNING: If there are obstacles in the room being cleaned, the robot might not be able to reach the
charging base. In this case, take the robot manually.
WI-FI SETUP
In order to access all the RQDQV U HWPEVKQPU HTQO CP[YJGTG KV KU UWIIGUVGF VQ FQYPNQCF VJG *QQXGT
H-GO 300 App.
You will be able to control the RQDQV KP VJG OQUV GH EKGPV YC[
App advantages:
• Control your robot in an easy and intuitive way.
• Activate the cleaning process from anywhere.
• Carry out settings and daily scheduling.
• Choose between its different cleaning modes.
Instructions:
1. Download the Hoover H-GO300 App from App Store or Google Play Store.
2. Press the ON/OFF power switch on the bottom robot. [Fig. 9]
2TGUU VJG QP UVCPFD[ DWVVQP QP VJG FGXKEG WPVKN VJG DWVVQP CUJGU
4. Open the APP, create an account with your e-mail and a password.
%QP TO NQIKP
6. Turn on the WIFI on your smartphone, input the WIFI password and connect the robot.
WARNING
• The Wi-Fi name and password cannot exceed 32 characters.
+H VJG PGVYQTM EQP IWTCVKQP HCKNU VQ EQPPGEV HQNNQY VJG DGNQY UVGRU
C 6JG TQDQV KU VQQ HCT CYC[ HTQO VJG TQWVGT
D 6JG 9K(K RCUUYQTF KU KPEQTTGEV
E 6JG 9K(K PGVYQTMU KU PQV ) *\
* Certain Models Only ** May vary according to model
7
Publicité
Table des Matières
