Télécharger Imprimer la page
•PROGRESS
CAUTION: Risk of fire. Min 900C supply conductors. Consult a qualified electrician to ensure correct branch circuit conductor.
WARNING - If any Special Control Devices are used with this Fixture, Follow the Instructions Carefully to assure full
compliance With N.E.C. requirements.
CAUTION - All glass is fragile, use care when handling Glass component(s) and or Lamp(s)
WARNING - To comply with the National Electrical Code and Underwriters Laboratories requirements, when Installed
outdoors, or In wet locations, the edge of the wall plate coming in contact with the mounting surface, must be sealed with
a latex waterproof caulking to prevent water from entering the outlet box.
ASSEMBLY
STEPS
MODE
D'ASSEMBLAGE
PASOS
PARA
ENSAMBLAR:
(NOT FURNISHED)
(NO INCLUIDA)
(NON FOURNIE)
WHITE SUPPLY
WHITE, MARKED OR
WIRE
RIBBED
FIXTURE
UL LISTED
WIRE NUTS
BLACK SUPPLY
BLACK OR SMOOTH
WIRE
FIXTURE
BARE COPPER
OR
BARE COPPER
GREEN GROUND
GREEN
FIXTURE
WIRE FROM suppLY
GROUND
OR
BARE COPPER
OR
GREEN
SCREW
GREEN
GROUND
WIRE
Customer
Serv.ce:
1-800-447-1723
Assembly
CAUTION:
Read instructions carefully and turn electricity off at main
circuit breaker panel before beginning installation.
560174,
If there are any questions, contact a Qualified Electrical Contractor.
WIRE
WIRE
OR
WIRE
GROUND
& Installation
560175
PAGE
1 of
2
Instructions
D
B
SPEC
NO
93113789
loading

Sommaire des Matières pour Progress Lighting 560174

  • Page 1 CAUTION: Read instructions carefully and turn electricity off at main circuit breaker panel before beginning installation. 560174, 560175 CAUTION: Risk of fire. Min 900C supply conductors. Consult a qualified electrician to ensure correct branch circuit conductor. WARNING - If any Special Control Devices are used with this Fixture, Follow the Instructions Carefully to assure full compliance With N.E.C.
  • Page 2 Instructions d'Assemblage et Installation MISE EN GARDE. Lire les instructions avec soin et couper le courant au disjoncteur central avant de commencer l'installation. MISE EN GARDE. Risque d'incendie. Min 900C conducteurs d'ahmentation. Consulter un électriaen qualifié pour assurer le conducteur de circuit de dérivation.

Ce manuel est également adapté pour:

560175