Troubleshooting - Beko BUFR2715PSIM Manuel D'utilisation

Masquer les pouces Voir aussi pour BUFR2715PSIM:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Troubleshooting

7
Please review this list before calling
the service. This will save you time and
money. This list contains frequently
encountered problems that are not results
of faulty workmanship or material use.
Your product may not have some of the
features described here.
The refrigerator is not operating.
It may not be plugged in properly.
>>>Plug in the product properly.
The fuse of the socket to which
your refrigerator is connected or
the main fuse may have blown.
>>>Check the fuse.
Condensation on the side wall of the
fridge compartment (MULTI ZONE,
COOL CONTROL and FLEXI ZONE).
The door may have been opened/
closed frequently. >>>Do not
open/close the refrigerator door
frequently.
The environment may be too humid.
>>>Do not install the refrigerator
at locations with a very high level of
humidity.
Foods containing liquid may have
been placed into the refrigerator in
vessels without covers. >>>Do not
place foods containing liquid into
the refrigerator in unsealed vessels.
Door of the refrigerator may have
been left ajar. >>>Do not keep the
doors of your refrigerator open for a
long time.
The thermostat may have been
set to a very cold level. >>>Set the
thermostat to an appropriate level.
The compressor is not operating.
Protective thermal of the
compressor will blow out during
sudden power failures or plug-
out plug-ins as the refrigerant
pressure in the cooling system
of the refrigerator has not been
balanced yet. The refrigerator will
start running approximately after 6
minutes. Please call the Authorised
Service Provider if the refrigerator
does not start at the end of this
period.
The freezer is in defrosting cycle.
>>>This is normal for a refrigerator
that performs full-automatic
defrosting. Defrosting cycle is
performed periodically.
The refrigerator may not be plugged
in. >>>Make sure that the plug fits
the socket.
Temperature settings may be
incorrect. >>>Select the correct
temperature value.
Possible power failure. >>>The
refrigerator will start to operate
normally when power restores.
The operation noise increases when
the refrigerator is running.
Operating performance of the
refrigerator may vary based on the
ambient temperature changes. This
is normal and not a fault.
The fridge is running frequently or
for a long time.
20 /26 EN
Refrigerator / User Manual

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Bufr2715whBufr2715ssim

Table des Matières