Adjusting The Feet; Electrical Connection; Door Open Warning; Changing The Illumination Lamp - Beko BUFR2715PSIM Manuel D'utilisation

Installation

3.3. Adjusting the feet

If the product stands unbalanced
after installation, adjust the feet on
the front by rotating them to the right
or left.
3.4. Electrical
connection
WARNING:
A
connections via extension
cables or multi-plugs.
WARNING:
B
cable must be replaced by the
Authorized Service Agent.
If two coolers are to be
C
installed side by side, there
should be at least 4 cm
distance between them.
Our company shall not be liable
for any damages that will arise
when the product is used
without grounding and electrical
connection in accordance with the
national regulations.
Power cable plug must be within
easy reach after installation.
Do not extension cords or cordless
multiple outlets between your
product and the wall outlet.
Refrigerator / User Manual
Do not make
Damaged power
11 / 26 EN
Hot Surface Warning!
Side walls of your product is
equipped with refrigerant
pipes to improve the cooling
system. Refrigerant with
high temperatures may flow
C
through these areas, resulting
in hot surfaces on the side
walls. This is normal and does
not need any servicing. Please
pay attention while touching
these areas.

3.5. Door Open Warning

*May not be available in all models
An audio warning signal will be given
when the door of your product is
left open for at least 1 minute. This
warning will be muted when the door
is closed or any of the display buttons
(if any) are pressed.
3.6. Changing the
illumination lamp
illumination of your refrigerator, call
your AuthorisedService.
The lamp(s) used in this appliance
is not suitable for household room
illumination. The intended purpose of
this lamp is to assist the user to place
foodstuffs in the refrigerator/freezer
in a safe and comfortable way.
The lamps used in this appliance
have to withstand extreme physical
conditions such as temperatures
below -4 °F.
(only chest and upright freezer)