Service/Maintenance; Service & Maintenance; Symbols On The Product; Risk Levels - GreenWorks 2506602 Manuel D'utilisation

EN
2.4

SERVICE/MAINTENANCE

• Keep all nuts, bolts, and screws tight in order to
ensure the equipment is in safe working condition.
• Never remove or tamper with safety devices. Check
their proper operation regularly. Never do anything
to interfere with the intended function of a safety
device or to reduce the protection provided by a
safety device.
• Keep machine free of grass, leaves, or other debris
build up. Allow machine to cool before storing.
• Never make any adjustments or repairs with the
motor running.
• Always remove battery pack from mowers before
adjusting, cleaning, or repairing.
• Check grass catcher components and the discharge
guard frequently and replace with manufacturer's
recommended parts, when necessary.
• Mower blades are sharp, and can cut. Wrap the
blades or wear gloves, and use extra caution when
servicing.
• Use identical replacement blades only.
• Maintain or replace safety and instruction labels, as
necessary.
• If situations occur that are not covered in this
manual, use care and good judgment or contact
Customer Service for assistance.
3

SYMBOLS ON THE PRODUCT

Some of the following symbols may be used on this tool.
Please study them and learn their meaning. Proper
interpretation of these symbols will allow you to operate
the tool better and safer.
Symbol Name
V Volt
A Amperes
Hz Hertz
W Watt
min Minutes
/min Per Minute
Alternating
Current
Direct Cur-
rent
No Load
n o
Speed
Safety Alert
English
Explanation
Voltage
Current
Frequency (cycles per
second)
Power
Time
Revolutions, strokes, sur-
face speed, orbits etc.,
per minute
Type of current
Type or a characteristic
of current
Rational speed, at no
load
Precautions that involve
your safety.
Symbol Name
Eye Protec-
tion
WARNING
--- Wet Con-
ditions
Read Opera-
tor's Manual
Maintain
Safety Devi-
ces
Looking Be-
hind While
Backing
DANGER ---
Keep Hands
and Feet
Away
DANGER ---
Keep By-
standers
Away
DANGER ---
Thrown Deb-
ris
DANGER ---
Steep Slope
Hazard
4

RISK LEVELS

The following signal words and meanings are intended
to explain the levels of risk associated with this product.
SYM- SIGNAL
BOL
DANGER
6
Explanation
Always wear eye protec-
tion with side shields
marked to comply with
ANSI Z87.1 when operat-
ing this equipment.
Do not expose the prod-
uct to rain or moist condi-
tions.
To reduce the risk of in-
jury, user must read and
understand operator's
manual before using this
product.
Do not open or remove
safety devices while the
tool is running.
Look down and behind
first to avoid tripping
when pulling back.
To reduce the risk of in-
jury, keep hands and feet
away from rotating parts.
Do not operate unless
discharge cover or grass
bag is in its proper place.
If damaged, replace im-
mediately.
Do not mow when chil-
dren or others are near-
by.
Remove objects that can
be thrown by the blade in
any direction. Wear safe-
ty glasses.
Use extra caution on
slopes. do not mow
slopes greater than 15
degrees.
MEANING
Indicates an imminently
hazardous situation,which,
if not avoided, will result in
death or serious injury.