Nespresso GRAN LATTISSIMA Guide De L'utilisateur page 33

The Milk froth quality is not up to standard.
I cannot enter Menu mode.
The milk jug cannot be dismantled.
Turn off the machine.
The milk jug is inserted but the milk buttons are not enabled.
The brewed quantity is not enough.
The coffee buttons flash alternately to milk-based drinks buttons 3
times every second until cooling is complete.
- Use skimmed or semi-skimmed cow's milk at refrigerator temperature (about 4° C/ 39.2 F).
- The milk froth regulator knob is on
- Rinse after each milk preparation (see the "Cleaning the milk jug" section).
- Descale the machine (refer to the "Descaling" section).
- Do not use frozen milk.
- Ensure the air aspiration piece is clear. Refer to the "Hand washing of milk jug" section.
- Ensure all the components of the milk jug are well assembled. Refer to the "Assembling the milk jug" section.
- Be sure to remove the milk jug.
- Be sure to press simultaneously (
- Be sure to remove descaling pipe.
- Press the buttons on the sides of the milk jug to remove the parts.
- Refer to the"Assembling/Disassembling the milk jug" section.
- Press the On-Standby button (The machine is on stand-by – consumption 0.22 Wh).
- The milk froth regulator knob is on
- Always check that the water level is above "Min" level.
- Overheating alert: all functions are shut off until the temperature drops.
(remove to clean) position. Turn it to the
) and ( ) buttons for 3 seconds.
(rinse) position. Turn it to (milk) position.
EN
(milk) position.
33