Guide d'utilisation | VLT® Soft Starter MCD 600
•
Paramètre 1-1 Origine commande : sélectionner Smart Card.
•
Paramètre 7-1 Fonction entrée A : sélectionner Cmd ignorée : log.
•
Paramètres 30-1 à 30-15 Conf. entrée pompe : régler en fonction des besoins.
•
Paramètres 31-1 à 31-4 Protection débit : régler en fonction des besoins.
•
Paramètres 33-1 à 33-5 Commande pression : régler en fonction des besoins.
Danfoss A/S © 2018.10
Exemples d'applications
AQ262141844215fr-000201 / 175R1174| 129