Basic Setup; Channel Setup - Insignia NS-15LCD Guide De L'utilisateur

NS-15LCD 15-inch TV - combined.fm Page 15 Wednesday, March 29, 2006 5:16 PM
NS-15LCD 15" LCD TV
To watch a cable or satellite channel:
• If the TV is connected to a cable box or satellite box, press
CH
channel setting of the device, then select the desired channel
on that device.
To watch external input:
• When external equipment is connected to the AUDIO/VIDEO
input jacks, press INPUT on the remote repeatedly to cycle
through the available input sources:
•
•
•
•
•

Basic setup

To set the source:
1 Press MENU. The main menu opens.
2 Press CH
Tuner menu. The Tuner menu opens.
3 Press CH
Cable or Air.
4 Press MENU twice to exit.

Channel setup

Your TV can memorize all available channels for both antenna and
cable channels. After all available channels are memorized, press
CH / to scan through channels.
or to select CH3 or CH4, according to the output
TV
AV
S-Video
Component
VGA
/ to select Tuner, then press VOL
Source
Channel
Delete CH
AFT
Auto Search
Channel Lock
715.25MHz
Fine Tune
/ to select Source, then press VOL
www.insignia-products.com
/
Cable
111
No
On
Off
/
to open the
to select
15