Maintenance And Cleaning Instructions - Homcom Vog55 Instructions

●
In case of any spilt fuel, it must be immediately cleaned with an absorbent tissue,
then cleaned with water to prevent ignition outside the burner reservoir.
● CAUTION: Spilled fuel may cause staining on flooring.
● Use a long lighter or long match to safely ignite the fuel in the burner. Keep a
horizontal minimum distance of 140mm (5.5 inches) when igniting the fire.
● If the flame does not ignite, repeat the ignition process until the flame burns
steadily.
● The fuel may burn low initially. Allow approximately 15 minutes for the flame to
reach optimum temperature and height.
● ATTENTION: Store the fuel at room temperature to facilitate ignition
● CAUTION: Store the fuel in a fire-safe area, at least one meter (40 inches) away
from the appliance. Do not place fuel in front of appliance.
● Keep your face and body away from the appliance during the ignition process.
REFILL WARNING
● Before refilling the burner, ensure there is no longer any visible flame on the
surface.
● Note: The flame may be difficult to see, so ensure it is fully extinguished.
● WARNING! Never attempt to refill a burner that is still burning. It is crucial to wait at
least 30 minutes for the burner to cool down before refilling it.
EXTINGUISHING THE FLAME
● To extinguish the flame, use the extinguisher tool that is provided in the package.
Keep the fire extinguishing tool at least 140mm (5.5 inches) away from the flame.
●
CAUTION: Never extinguish the flame with water.
● CAUTION: Never blow out the flame to put it out, as this can increase the flame.
● Before reigniting, allow the flame to burn out completely. This prevents fuel residue
and potential fire hazards.
● Fire will extinguish when fuel burned out (about 3 hours depending on the fuel).
● To extinguish the flame before the fuel has burned out, use the extinguisher tool to
fully close the opening of the burner and wait for the flame to be extinguished.
● If the flame is not immediately extinguished, close the cover and wait
approximately 10-15 minutes for the flame to cool down. Repeat these instructions
until the frame is fully extinguished.
● CAUTION: The appliance will remain hot when lit and may stay hot for a while after
the flame has been extinguished. Handle with caution.
● It is recommended to let the appliance burn until all the fuel has been consumed.

MAINTENANCE AND CLEANING INSTRUCTIONS

● Please sure to shut-down the appliance before maintenance or cleaning.
● Use a wet cloth to clean the inside surface of the appliance. The burner may
change color due to heat, and the stainless steel may have a different appearance over
time. Regular maintenance will help preserve its color.
CAUTION: Do not directly touch the surface of the
burner It can be extremely hot.
4