Start Up Instructions; List Of Materials; Mounting The Machine; Installation Of The Handlebar - Garland Tasker 710 G Manuel D'instructions

English

6. START UP INSTRUCTIONS

6.1.LIST OF MATERIALS

This machine includes the following elements that you
will find inside the box:
• Machine
• Protector.
• Handlebar.
• Tools.
• Cutting accessories
• Pruner accessory
• Hedge trimmer accessory
• Thread head
• Extension
• Sword guard
• Sword.
• Chain.
• Chain guard.
• Harness.
• Disc
• Manual.
Ensure that all elements listed above are included with
the machine. Thanks to the quality control checks at
the factory it is highly unlikely that any elements will
be missing. If you were to find any element missing,
do not use the machine until the defect has been
repaired or the machine is complete.
Using the machine with defective parts or without all
the elements can cause severe personal damages.

6.2. MOUNTING THE MACHINE

6.2.1. INSTALLATION OF THE HANDLEBAR

6.2.2. TRANSMISSION ASSEMBLY
6.2.3. PROTECTOR ASSEMBLY
Guard
support
The protector skirt must be removed to work with
the cutting disc.
48/174
Protector