Sealy Easy Twin 82001-38.74-040 Manuel Du Propriétaire page 11

remote control
Remote Pairing
The original remote that comes in the box is already paired to the
adjustable base. No further action is required. In the event that the
remote is not paired with the base, follow the steps below.*
STEP 1
Locate the Battery Backup Box and
press the button TWICE. A light on the
Battery Back Up Box will illuminate.
POWER DOWN
Button
STEP 2
On the back of the remote, press and hold
down the PAIR button. The PAIR button will
illuminate blue and start flashing. When the
PAIR button stops flashing, the illuminated
light on the Battery Backup Box will go out.
Release the PAIR button. The remote is now
paired to the adjustable base.
STEP 3
Test all remote functions. If the remote buttons do not impact the
adjustable base movements, please repeat the process again or call Sealy
customer service: U.S. 1-800-499-1965 | Canada 1-800-268-4414
*ALTERNATE REMOTE PAIRING PROCESS!
Locate the Control Box (see parts list on page 3) and press the
button twice. A green LED light will illuminate on the Control
Box. On the back of the remote, press and hold the PAIR
button. The PAIR button will illuminate blue and start flashing.
When the PAIR button stops flashing, the green LED light on
the Control Box will go out. Release the PAIR button. The
remote is now paired to the adjustable base.
Child Lock Feature
Activate Child Lock
Press and hold HEAD UP and HEAD DOWN buttons together
for approximately six (6) seconds. The LED light at the top of
the remote will flash red. When the red LED light goes away,
the remote is now in Child Lock. Pressing any buttons while in
Child Lock will yield no movement to your adjustable base.
Deactivate Child Lock
Press and hold FOOT UP and FOOT DOWN buttons
together for approximately six (6) seconds. The LED light at
the top of the remote will flash red. When the red LED light
goes away, the remote is no longer in Child Lock. The remote
and adjustable base will work normally.
9