Table des Matières
Publicité
English
Technical Information
Max. flow rate
26037xx1
26014xx1
26036xx1
Installation Considerations
• For best results, Hansgrohe recommends that
this unit be installed by a licensed, professional
plumber.
• Please read over these instructions thoroughly
before beginning installation. Make sure that
you have all tools and supplies needed to
complete the installation.
• This unit does not include a wall supply. It must
be used with Hansgrohe model 27458xx3
or another approved supply that complies
with ASME A112.18.1/CSA B125.1 including
ASME A112.18.3.
• 26037xx1 only: This showerhead is for use
with automatic compensating valves rated at
1.75 GPM (6.6 L/min) or higher.
• 26014xx1 only: This showerhead is for use with
automatic compensating valves rated at 1.5 GPM
(5.7 L/min) or less.
2
2.5 GPM (9.5 L/min)
2.0 GPM (7.6 L/min)
1.75 GPM (6.6 L/min)
• 26036xx1 only: This showerhead is for use
with automatic compensating valves rated at
1.3 GPM (4.9 L/min) or less.
• To prevent scald injury, the maximum output
temperature of the shower mixing valve (not
included) must be no higher than 120°F
(49°C). In Massachusetts, the maximum output
temperature can be no higher than 112°F
(44°C).
• Keep this booklet and the receipt (or other proof
of date and place of purchase) for this product in
a safe place. The receipt is required should it be
necessary to request warranty parts.
Publicité
Table des Matières
