Allen + Roth L-GZ604PCO-F Mode D'emploi page 9

ASSEMBLY INSTRUCTIONS
5. Attach the left long decorative groove (C1) and right short
decorative groove (D2) of one assembly to 2 posts (A) using
M6 x 35 mm bolts (CC) and M6 flat washers (BB). Tighten
with M6 wrench (GG).
Repeat for the other decorative groove assemblies to
make the frame of the gazebo.
IMPORTANT: Ensure the frame is assembled properly
before moving on to the next step.
Hardware Used
M6 Flat Washer
BB
CC
M6 x 35 mm Bolt
GG
M6 Wrench
6. Secure the right short decorative grooves (D2) and left
long decorative grooves (C1) to the outside of the posts (A)
using M6 x 15 mm bolts (AA) and M6 flat washers (BB). T
ighten with Phillips screwdriver.
Repeat this step for the right long decorative grooves (C2)
and left short decorative grooves (D1) .
Hardware Used
M6 x 15 mm Bolt
AA
M6 Flat Washer
BB
7. Attach corner covers (R1) to each corner of the gazebo
frame. Secure the top of the corner covers (R1) to the
assembly using M5 x 15 mm bolts (DD) and secure the
bottom using M6 x 15 mm bolts (AA) and M6 flat washers
(BB). Tighten with Phillips screwdriver.
Hardware Used
M6 x 15 mm Bolt
AA
M6 Flat Washer
BB
M5 x 15 mm Bolt
DD
5
x 16
x 16
6
x 1
x 8
x 8
7
x 8
x 8
x 8
9
BB
CC
A
C1
D2
BB
A
AA
DD
R1
BB
AA
Lowes.com/allenandroth
BB
CC
D2
C1
BB
AA
DD
BB
AA