Important - Allen + Roth L-Gz604Pco-F Mode D'emploi

ASSEMBLY INSTRUCTIONS
18. Slide a PC panel 3 (T3) into the upper middle top section
created by two middle beams (F). Insert a middle slot (H3)
into the assembly next, then fit another PC panel 3 (T3) into
the middle slot (H3), it will be secured in step 20.
Repeat this step for the remaining PC panels 3 (T3).
IMPORTANT: The side of the panels with the "ON" sticker
should face upward.
19. Slide a PC panel 1 (T1) into the triangular top section
created by a oblique beam (E) and a middle beam (F). Insert
a left slot (H1) into the assembly next, then fit a PC panel 2
(T2) into the left slot (H1); it will be secured in the next step.
Repeat this step for the remaining PC panels 1 (T1) and PC
panels 2 (T2), then do the same for PC panels 4 (T4) and
PC panels 5 (T5) into right slot (H2).
IMPORTANT: The side of the panels with the "ON" sticker
should face upward.
20. Cover the bottom of PC panel 3 (T3) with F-baffle 3 (I3)
and cover the bottom of PC panel 2 (T2) with F-baffle 1 (I1),
then cover the bottom of PC panel 5 (T5) with F-baffle 2 (I2).
Note: F-baffle 1 (I1) and F-baffle 2 (I2) will overlap at short
side. F-baffle 1 (I1) and F-baffle 3 (I3), and F-baffle 3 (I3)
and F-baffle 2 (I2) will overlap at long side.
Repeat this step for the left F-baffle 1 (I1), F-baffle 2 (I2) and
F-baffle 3 (I3).
18
L3
19
E
20
Lowes.com/allenandroth
14
T3
H3
T3
T1
H1
T2
I3
F
F