Hypertherm Powermax30 Mode D'emploi page 8
Bulletin de service sur le terrain; remplacement du filtre à air et du détendeur
Masquer les pouces
Voir aussi pour Powermax30:
- Manuel de service (225 pages) ,
- Manuel de l'utilisateur (72 pages) ,
- Mode d'emploi (67 pages)
Publicité
Air Filter/Regulator and Pressure Switch Replacement
12. Locate the new brass coupler (015550) and pipe fitting (015618) in the kit.
13. Lightly apply thread sealant to the threads on one end of the pipe fitting, and screw the coupler onto that end of the
pipe fitting.
14. Apply a small drop of thread sealant to the threads on the other end of the pipe fitting, and screw that end of the
fitting into the side of the air filter/regulator.
If applied too heavily, excess amounts of thread sealant can contaminate the gas line.
Coupler
The regulator is pre-set at the factory. Do not adjust this setting.
8
Pipe fitting
CAUTION!
Powermax30/30 XP Field Service Bulletin 805330 Revision 2
Publicité
