Publicité
About MRI Mode
About MRI Mode
You must use the Remote Control to enable MRI
Mode on the Stimulator before an MRI scan is
performed and exit MRI Mode after the MRI scan
has been completed. Do not leave the Stimulator
in MRI Mode for extended periods of time
beyond what is necessary to perform the MRI
scan. If you have a rechargeable Stimulator, the
Stimulator battery must be fully charged before
MRI Mode is enabled.
Your healthcare provider and MRI center must
ensure all guidelines listed in ImageReady
Guidelines for Boston Scientific DBS Systems are
followed before an MRI scan is performed. Ask
your healthcare provider or MRI center to contact Boston Scientific
Customer Support or go to www.IFU‑BSCI.com for the latest version
of the manual.
Vercise™ DBS Systems Remote Control 4 Handbook, 92753307-07
MRI
TM
Note
Always carry your
Remote Control and
Charger to the MRI
center.
WARNING
The Remote Control
and Charger are MR
unsafe and must not
be taken inside the
scan room.
MRI MODE
Page 37
Publicité
