Publicité
7 Repair
Regularly check the filter system for leaks. Regularly check the hoses for kinks. Bent hoses must
be replaced.
The complete filter system must be replaced in rotation after a maximum of ten years. The hoses
must be replaced in rotation after a maximum of five years.
Caution: Before replacing filter systems or hoses, read the technical data (Chapter 9) and the
!
operating and safety information (Chapter 3).
Regularly clean the outside of the filter system with a soft, damp cloth.
Caution: Do not use any abrasive chemicals, cleaning solutions or astringent cleaning agents.
!
8 Troubleshooting
8.1 No water flow
Cause:
Water intake closed.
Troubleshooting:
O pen the water intake at the upstream stop valve or by closing the locking
h andle
8.2 No or low water flow in spite of open water intake
Cause:
Mains pressure too low.
Troubleshooting:
C heck mains pressure. If the fault continues, check the filter system and filter
cartridge and replace if necessary.
Cause:
Filter head not mounted in direction of flow.
Troubleshooting:
Dismantle filter head and install in direction of flow (Chapter 4).
8.3 Leak
Cause:
Screwed connections not fitted correctly.
Troubleshooting:
C heck mains pressure. Check all screwed connections and mount according
to Chapter 4. If the fault persists, replace filter system.
on the filter head
.
2
1
EN
15
Publicité
