Publicité
VIVREAU shall not be held liable for any damage, including subsequent damage, arising from the
incorrect installation or use of the product.
3.4 Specific safety information
Water used as intake water for the PURITY C water filter system must be of drinking water quality.
•
The PURITY C water filter system is only suitable for cold water use within the water intake
temperature range stated in Chapter 9. No microbiologically impaired water or water of unknown
quality may be used without appropriate disinfection.
If there are official instructions to boil tap water, the filter system must be decommissioned.
•
When the requirement to boil water comes to an end, the filter cartridge must be replaced and
the connections cleaned.
It is generally recommended to boil tap water for certain groups of people (e.g. people with
•
weakened immune systems, babies). This also applies to filtered water.
Note for people with kidney disease or dialysis patients: during the filter process, the potassium
•
content may be increased slightly. If you suffer from kidney disease and/or have to stick to a
special potassium diet, we recommend you consult your doctor beforehand.
VIVREAU recommends not to decommission the filter system for long periods. If the VIVREAU
•
PURITY C filter system is not used for several days, we recommend that the filter system be
flushed with the volume of water indicated in the table below.
Filter cartridge
PURITY C50
PURITY C150
PURITY C300
PURITY C500
PURITY C1100
PURITY C1000 AC
EN
The filter system must not be opened or dismantled during operation. The filter cartridge
•
must not be opened.
Production date
•
Production code filter head – example: H 8375 01381
8
Production year, this example: 2018
37
Production week, this example: calendar week 37
5
Production day from Monday (1) to Sunday (7), this example: Friday
01381
Serial identification number
Production code filter cartridge – example: B8224350010
8
Production year, this example: 2018
22
Production week, this example: calendar week 22
4
Production day from Monday (1) to Sunday (7), this example: Thursday
35
Internal Identification No. of filter medium, this example No. 35
0010
Consecutive number of the filter cartridge, this example the tenth cartridge; reset when the day changes
3.5 Technical safety assembly instructions
The appliance in which the filter is used must be free of limescale prior to installation.
•
Protect the filter system from sunlight and mechanical damage. Do not assemble near sources
•
of heat and open flames.
A stop valve must be installed before the filter system inlet hose.
•
If the water pressure is higher than 8.6 bar (125 psi), a pressure reducer must be installed in
•
front of the filter system.
12
Flushing volume
from 2 days to 1 week not used
2 liters (0.5 US gallons)
3 liters (0.8 US gallons)
6 liters (1.6 US gallons)
10 liters (2.6 US gallons)
18 liters (4.76 US gallons)
1 liter (0.26 US gallons)
Flushing volume
> 1 week not used
20 liters (5.3 US gallons)
30 liters (7.9 US gallons)
60 liters (15.9 US gallons)
100 liters (26.4 US gallons)
180 liters (47.6 US gallons)
10 liters (2.6 US gallons)
Publicité
