Bosch ConnectModule BCM3100 Notice D'utilisation D'origine page 6

English – 2
As long as the ConnectModule is supplied with voltage and
the relevant services are activated, it sends data to the re-
gistered account for the eBike.
The ConnectModule has an internal battery so that it can
provide the services independently of the eBike battery. The
internal battery's state of charge can be viewed via the eBike
Flow app. When the internal battery's state of charge is low,
the transmission intervals for the position are reduced. If the
state of charge continues to fall, a sufficiently charged eBike
battery should be inserted. When doing this, there should be
no chargers connected to the eBike.
Switching On Whilst eBike Alarm is Active
If you move your eBike whilst the <eBike Alarm> is active,
the alarm will not go off provided the predefined digital key
(smartphone or the Kiox 300/Kiox 500 display) is present.
To set off on your eBike, press the on/off button on the con-
trol unit.
For eBikes with assistance up to 45 km/h, you also need to
actively select a mode after turning it on.
Maintenance and servicing
Maintenance and Cleaning
The ConnectModule is maintenance-free. In the event of
damage or failure, contact a service centre directly.
If services are not functioning despite being activated, con-
tact the specialist dealer directly, from whom you purchased
the ConnectModule.
Note: If you are handing in your eBike to a service centre for
maintenance, it is recommended that you deactivate <Lock
& Alarm>.
Transport
As soon as you transport your eBike (e.g. in a vehicle trailer,
train, aeroplane, etc.), we recommend deactivating all indi-
vidual services or activating the <Transport mode> func-
tion. This also deactivates any ConnectModule communica-
tion. This will allow you to prevent false alarms.
After-sales service and advice on using products
If you have any questions about the eBike and its compon-
ents, contact a specialist workshop.
For contact details of specialist workshops, please visit
www.bosch-ebike.com.
Further information on the eBike components
and their functions can be found in the Bosch
eBike Help Center.
Disposal and substances in products
You can find information about substances in products at the
following link:
www.bosch-ebike.com/en/material-compliance.
Do not dispose of eBikes and their components with house-
hold waste.
0 275 008 3CM | (21.01.2025)
An in-store return is possible, provided the store voluntarily
offers a return or is legally obligated to do so. Refer to the na-
tional regulations in this case.
The individual eBike components as well as ac-
cessories and packaging should be recycled in
an environmentally friendly manner.
You must independently ensure that no per-
sonal data is stored on these eBike components any longer.
Batteries that can be removed from the eBike components
without destruction must be removed before disposal itself
and sorted for separate battery collection.
In accordance with Regulation (EU)
2023/1542, electrical and electronic equip-
ment that is no longer suitable for use and de-
fective or used rechargeable batteries/non-re-
chargeable batteries must be collected separ-
ately and recycled in an environmentally
friendly manner.
Electrical and electronic equipment are collected separately
for pre-sorting by type and helps to ensure that raw materi-
als are treated and recovered properly, thereby protecting
people and the environment.
APPROVED
Subject to change without notice.
Bosch eBike Systems