Cruising In Other Conditions; Cruising In Salt Water; Cruising In Turbid Water - Yamaha F4A Manuel D'utilisation

EMU00308
PROCEDURE
1) Slightly tilt up the engine and the tilt-
support bar is turned to the locked
position automatically to support the
engine.
2) When bringing the engine to the
home position, slightly tilt up the
engine and slowly tilt the engine
down pulling up the lever of the tilt
support bar.
NOTE:
The outboard motor is provided 2 or 3
positions for shallow water cruising.
EMU00316
CRUISING IN OTHER
CONDITIONS

CRUISING IN SALT WATER

After operating in salt water, wash out the
cooling-water passages with fresh water
to prevent them from becoming clogged-
up with salt deposits.
NOTE:
Refer to cooling system flushing instruc-
tions in "TRANSPORTING AND STORING
OUTBOARD MOTOR".

CRUISING IN TURBID WATER

It is strongly recommended that the
optional chromium-plated water-pump kit
be installed if the outboard is to be used
in turbid (muddy) water conditions.
3-22
GB