Mounting The Tine Bars - Vicon ANDEX 773 Notice De Montage

EN
Only SwM 7751 and Andex 773
ø 10 mm
A
Fig. 2-10
Fig. 2-11
Fig. 2-12
8
links
rechts
2.8

Mounting the tine bars

The tine bars are either enclosed or already
mounted, depending on the mode of shipment.
When mounting, take into account the fact that
the tines have different thickness (non at 9177S).
The tine bars of the rear rotary unit are marked
with a sticker (A) (fig. 2-10).
Attention!
Make sure the parts are correctly
mounted, see fig. 2-11!