Télécharger Imprimer la page

Shure AXIENT DIGITAL AD2 Guide De L'utilisateur page 8

Masquer les pouces Voir aussi pour AXIENT DIGITAL AD2:

Publicité

Locking the Interface
Lock transmitter interface controls to prevent accidental or unauthorized changes to parameters. The lock icon appears on the home screen when the
interface lock is enabled.
1. From the Utilities menu, navigate to Locks and select one of the following lock options:
- None: The controls are unlocked
- Power: The power switch is locked
- Menu: The menu parameters are locked
- All: The power switch and menu parameters are locked
2. Press enter to save.
Tip: To quickly unlock a transmitter: Press enter twice, select None, and press enter.
Battery Installation
1
① Accessing the Battery
Compartment
Unscrew the cover on the
transmitter as shown to access
the battery compartment.
Setting the AA Battery Type
To ensure accurate display of transmitter runtime, set the battery type in
the transmitter menu to match the installed AA battery type.
Note: If a Shure SB900A rechargeable battery is installed, selecting a bat-
tery type is not necessary and the battery type will display Shure.
1. Navigate to the Utilities and select Battery.
2. Use the ▼▲ buttons to select the installed battery type:
- Alkaline = Alkaline
- NiMH = Nickel Metal Hydride
- Lithium = Lithium Primary
3. Press enter to save.
Battery
Battery: Alkaline
Battery: NiMH
2
② Installing Batteries
• AA Batteries: Place batteries
(note polarity markings) and AA
Adapter as shown. Close the
door to secure the batteries.
• Shure SB900A Battery: Place
battery as shown (note polarity
markings). Remove the AA
adapter and stow it in the door.
Close the door to secure the
battery.
Note: If using AA batteries, set the
battery type using the transmitter
menu.
Battery
Battery
Battery: Lithium
Installing the Battery Contact Cover
Use battery contact covers to prevent reflections from the battery contacts
during broadcasts or live performances.
1. Remove the transmitter handle.
2. Pull gently on the antenna cover to remove. Install
a battery contact cover in its place.
3. Reinstall the transmitter handle.
1
2
3
8

Publicité

loading