Code Entry Error; Keypad Locked - Simu Digicode Hz 2C Manuel D'installation

DIGICODE HZ 2C

Code entry error

Beginning of code entry incorrect
Continue by entering the right code and confirm by pressing a control button. Only the last digits entered will be registered.
Several incorrect code entries
If 15 incorrect codes are entered consecutively, the keypad is locked for 2 minutes.
If the keypad is locked, the indicator lights flash quickly when a button is pressed.
After 2 minutes, when the keypad is unlocked, the indicator lights no longer flash quickly when a button is pushed.
Now enter a valid code. If the code is incorrect, the keypad is locked again for 2 minutes.

Keypad locked

If the indicator lights are alternately flashing and the product does not react when a button is pressed, the keypad is safety
locked.
To unlock the keypad, it needs to be reset (see ).
Resetting the keypad [} 30]
©
Copyright 31
2025 SIMU SAS. All rights reserved.