Adding The Control Point To A Motorisation For An Overhead, Sectional Or Lateral Garage Door; Gm 1000 - Simu Digicode Hz 2C Manuel D'installation

Adding the control point to a motorisation for
an overhead, sectional or lateral garage door
GM 800

GM 1000

22
Memorising the control point for complete opening operation
1. Press the PROG button on the motorisation until the integrated lighting comes on (approx. 2 s).
2. Enter your master code.
3. Press the button on the control point which will open the garage door completely.
ð The integrated lighting flashes for 5 s.
1
PROG
2s
Memorising the control point for complete opening operation
PROG
1. Press the button on the drive until the screen displays
2. Enter your master code.
3. Press the button on the control point which will open the garage door completely.
ð The integrated lighting flashes for 5 s.
1
PROG
2s
2
2 3
DIGICODE HZ 2C
3
F0
(approx. 2 s).
5s
©
Copyright
2025 SIMU SAS. All rights reserved.