Programming Secondary Codes; Creating A Secondary Code; Deleting A Secondary Code - Simu Digicode Hz 2C Manuel D'installation

Programming secondary codes

Creating a secondary code

1. Enter the master code in use then press
button S until the indicator lights come
on.
2. Press the control button to be associated
with the secondary code.
3. Confirm by pressing S.
4. Enter the secondary code of your choice
(from 5 to 6 digits) and confirm by press-
ing S.
5. Enter the secondary code again and con-
firm by pressing S.

Deleting a secondary code

1. Enter the master code in use then press
button S until the indicator lights come
on.
2. Press the control button associated with
the secondary code to be deleted.
3. Press button S (approx. 7 seconds) until
the indicator lights go out.
28
1
2
3
4
5
1
2
3
DIGICODE HZ 2C
©
Copyright
2025 SIMU SAS. All rights reserved.