Télécharger Imprimer la page

Tunturi FUNCTIONAL TRAINER Mode D'emploi page 11

Publicité

Welcome
Important Safety Instructions
This manual is an essential part of your training equipment please
read all instructions in this manual before you start using this
equipment. The following precautions must always be followed:
Important safety notice
This exercise equipment is built for optimum safety. However,
certain precautions apply whenever you operate a piece of exercise
equipment. Be sure to read the entire manual before you assemble
or operate your equipment. In particular, note the following safety
precautions:
- Keep children and pets away from the equipment at all times.
DO NOT leave children unattended in the same room with the
equipment.
- Only one person at a time should use the equipment.
- If the user experiences dizziness, nausea, chest pain, or any other
abnormal symptoms, STOP the workout at once. CONSULT A
PHYSICIAN IMMEDIATELY.
Position the equipment on a clear, levelled surface. DO NOT use
the equipment near water or outdoors.
- Keep hands away from all moving parts.
- Always wear appropriate workout clothing when exercising. DO
NOT wear robes or other clothing that could become caught in the
equipment. Running or aerobic shoes are also required when using
the equipment.
Use the equipment only for its intended use as described in this
manual. DO NOT use attachments not recommended by the
manufacturer.
- Do not place any sharp object around the equipment.
- Disabled person should not use the equipment.
- Before using the equipment to exercise, always do stretching
exercises to properly warm up.
- Never operate the equipment if the equipment is not functioning
properly.
Warning:
Before beginning any exercise program, consult your physician.
This is especially important for individuals over the age of 35 or
persons with pre-existing health problems.
Read all instructions before using any fitness equipment.
Tunturi New fitness bv. assumes no responsibility for personal
injury or property damage sustained by or through the use of this
product.
Save these instructions!
Important assembly information
Before you start
We recommend to use two adjustable wrenches to assemble your
product. If you have metric sized wrenches in correct size this is fine
too.
‼ NOTE
• Suitable (adjustable) wrenches are "NOT" provided with the
product, neither included in the assembly kit.
• It is strongly recommended that this equipment is assembled by
two or more people to avoid possible injury.
‼ NOTE
• Pay attention when unpacking, small parts can be hidden/
packed in hollow spaces used as the product protective
materials.
• If a part is missing, contact your dealer.
Description illustration C
The illustration shows the hardware kit that comes with your product.
The hardware kit contains bolts, washers, screws, nuts etc. and the
required tools to properly fit your trainer.
Description illustration D
The illustrations shows you in the correct following order how to
assembly your trainer best.
⚠ WARNING
• Assemble the equipment in the given order.
• Carry and move the equipment with at least two persons.
⚠ CAUTION
• Place the equipment on a firm, level surface.
• Place the equipment on a protective base to prevent damage to
the floor surface.
• Refer to the illustrations for the correct assembly of the
equipment.
Additional assembly information for cable installation
Before installing the cables it is important:
- To de-tangle the cables fully.
- To avoid the cable from twisting during transiting over the pulley
wheels.
⚠ WARNING
• A twisted cable in the installation can result in separating the
outer protective plastic coating from the inner steel cable.
• A twisted cable in the installation can result in the cables to
entangle or mall malfunctioning of the weight plates return.
Before fixing the cable onto the selector shaft, all cables should be
routed throughout the station first.
The locking nut must be turned up fully as well.
- Fit the threaded cable end into the selector shaft by turning it in
clockwise direction as far as possible.
- Secure the fixation by turning the locking nut in clockwise direction
firmly.
1 1
English

Publicité

loading

Ce manuel est également adapté pour:

Selectorized v serie25pvs32000