Maintenance; Purification; Inspection; Repair - Xylem Sl Analytics ViscoClock Mode D'emploi

30
4

Maintenance

When using alkaline laboratory cleaners there is a danger to health (caustification, darnage to skin
and eyes)! Please observe the memorandums of the employer's liability insurance associations and
the safety data sheets of the manufacturers.
NOTE
The cleaners may affect the glass of the viscometer.
• Please use personal protective equipment such as eye protection, protective gloves, laboratory coat and
breath protection.

4.1 Purification

• After each use you should clean the stand (6; using a moist cloth and a commercially available cleaning
agent.
• Use a fine, dry brush to clean the upper (8) and lower (7) measurement plane (transmitter and receiver
are opposed to each other). Accurate measurement is only possible wlth clean measurement planes.
• The viscometer should be cleaned according to DIN 51 562 part 1. Subsequently, the viscometer must
be stored dry and free of dust!

4.2 Inspection

• Check cable and plug contacts for mechanical damage and corrosion.

4.3 Repair

• For repair, please send the Viscosity Measuring Unit ViscoClock to SI Analytics GmbH.

4.4 Purging and first-time filling

At the end of its useful life the Viscosity Measuring Unit ViscoClock has to be disposed of according to the
national regulations.
• When disposing components of the Viscosity Measuring Unit ViscoClock please note:
Metal parts should be channeled towards recycling
Plastic parts should be channeled towards recycling
Electric/electronic components should be channelled to be reused in electronic devices.
Maintenance