Publicité
READ THIS INSTRUCTIONS BEFORE USING THIS TOOL
1. KEEP WORK AREA CLEAN. Cluttered areas invite injuries.
2. CONSIDER WORK AREA CONNECTIONS. Don't use tools in damp,
wet, or poorly lit locations. Don't expose to rain. Keep work area well lit.
3. KEEP CHILDREN AWAY. All children should be kept away from work
area.
4. STOCK IDLE EQUIPMENT. When not in use, tools should be locked up
in a dry location to inhibit rust. If possible, store in an area out of reach of
children.
5. USE THE RIGHT TOOL. Don't force a small tool or attachment to do the
work of a larger industrial tool. Don't use a larger industrial tool. Don't use
a tool for a purpose for which it was not intended.
6. DRESS PROPERLY. Don't wear loose clothing or jewelry. Non-skid
footwear is recommended when working to prevent slipping. Wear
protective hair covering to contain long hair.
7. USE EYE PROTECTION. Wear approved impact goggles at all times
when using this tool.
8. SECURE WORK. Use clamps or a vise to hold the work if possible. It's
safer than using your bands and it frees both hands to operate the tool.
9. DON'T OVERREACH. Keep handles dry. Clean, and free from oil and
grease. Follow instructions for lubricating and changing accessories.
10. MAINTAIN TOOL WITH CARE. Keep handles dry, clean, and free from
oil and grease. Follow instructions for lubricating and changing
accessories.
11. CHECK DAMAGE PARTS. Before using any tool, any parts that
appear damaged should be carefully checked to determine that it will
operate properly and perform its intended function. Check for alignment of
moving parts, binding of moving parts, breakage of parts, mounting, and
other conditions that may affect its operation. Any part that is damaged
should be properly repaired or replaced by an authorized service center
unless otherwise indicated elsewhere in the instruction manual.
12. REPLACEMENT PARTS AND ACCESSORIES. When serving, use
only identical replacement parts. Only use accessories intended for use
- 3 -
Publicité
