UK declaration of performance
GB: Declaration of performance
UK declaration of performance in accordance
with the Construction Products Regulations
2019
1. Unique identification code of the product type:
•
EN 12050-1 or EN 12050-2.
2. Type, batch or serial number or any other element
allowing identification of the construction product as
required pursuant to Article 11(4):
•
PS.R pumping station pit marked with EN 12050-1 or
EN12050-2 on the nameplate.
3. Intended use or uses of the construction product, in
accordance with the applicable harmonised technical
specification, as foreseen by the manufacturer:
•
Pumping stations for pumping of wastewater
containing faecal matter marked with EN 12050-1 on
the nameplate.
•
Pumping stations for pumping of faecal-free
wastewater marked with EN 12050-2 on the
nameplate.
4. Name, registered trade name or registered trade mark
and contact address of the manufacturer as required
pursuant to Article 11(5):
•
Grundfos Holding A/S
Poul Due Jensens Vej 7
8850 Bjerringbro
Denmark.
5. NOT RELEVANT.
6. System or systems of assessment and verification of
constancy of performance of the construction product as
set out in Annex V:
•
System 3.
7. In case of the declaration of performance concerning a
construction product covered by a harmonised standard:
•
TÜV Rheinland LGA Products GmbH, identification
number: 0197.
Performed test according to EN 12050-1 or EN
12050-2 under system 3.
(description of the third-party tasks as set out in
Annex V)
•
LGA Test Report No. DE220WBH and DE22UZH7.
Type-tested.
8. NOT RELEVANT.
9. Declared performance:
The products covered by this declaration of performance
are in compliance with the essential characteristics
and the performance requirements as described in the
following:
•
Standards used: EN 12050-1:2001 or EN
12050-2:2000.
10
The performance of the product identified in points 1 and
.
2 is in conformity with the declared performance in point
9.
51