VEVOR FR25049L-72MBK Mode D'emploi page 7

NSTALLATION AND ASSEMBLY
I
Tools Required: Philips screwdriver, Pair of pliers, straight slot screwdriver,
adjustable wrench, step ladder and wire cutters.
CAUTION: Before installing the fan make sure you have turned OFF the
electricity supply.
a: Install mounting bracket
The ceiling fan must be installed in a location so that the blades are 30
inches (762mm) spacing from the tip of the moving blade to the nearest
objects or walls. When hanging the Fan, REMEMBER to turn off the
power.Follow the instruction below to hang your fan properly:
1. Choose a location for mounting the fan where the blades will have at
least 2.1 meters of clearance from the floor.
2. Make sure that the installation site will not allow the rotating fan blades
to come into contact with any object and that there is a minimum clearance
of 30 inch from the blade tip to the wall or ceiling. Please note that the
bigger this clearance is the better the airflow from your fan will be.
3. DO NOT use outdoors. Installing the fan in a position where it could be
exposed to water or moisture is dangerous. Dry areas are acceptable.
4. If the location you have chosen does not have a suitable support beam
capable of supporting 1004.pounds, install a brace 2"x4" between the
ceiling joists as a support medium.
5. Secure the hanging bracket to the ceiling joist or suitable structure or
outlet box that is capable of carrying a load of at least 100 pounds, with the
two long fixing screws provided. Ensure that at least 30mm of the screw is
threaded into the support.
NB: The fixing screws included are designed for use when ceiling fan
is secured onto timber joists or UL approved outlet box for fan. For all
others surfaces, additional and suitable fixing screws for that surface
will need to be purchased.
6