Unpacking Your Fan - Vevor Fr25049L-72Mbk Mode D'emploi

appliances as a toy.
NOTE: You must install a switch or circuit breaker that disconnects all
poles power of at least 3mm between each pole.

UNPACKING YOUR FAN

PREPARATION:
1. Unpack your ceiling fan carefully, then remove all parts and components,
and lay on a cloth or soft surface to avoid damage. DO NOT lay the motor
housing on its side, the housing may get damaged.
2. Before commencing installation, check that all parts are included.NB:
You may need to remove all foam packaging material to ensure there are
no missing components
CONTENTS:
A. Mounting bracket*1 B.Canopy*1 C.6"Down rod*1
D.Coupling cover*1 E.Motor assembly*1 F. Light kit*1
G.lampshade*1 H. Decorative cover*1 I. 10" Down rod*1
J. 20" Down rod*1 K.Blade*8 L.Receiver and Remote
control*1 (Includes screw package)
M. Screws bag*1
4