dji PHANTOM 4 RTK Guide De Démarrage Rapide page 4

Remote Controller
The Phantom 4 RTK remote controller has a transmission range of up to 4.3 mi (7 km) * with controls for
camera tilt and photo capture. DJI OcuSync is built into the remote controller, transmitting live HD imaging
from the camera directly. Simply tap the screen in the DJI GS RTK app or import KML/KMZ files to plan
an operation for convenient project management. Users can also connect the remote controller to a PC to
access DJI Terra for planning and executing operations. The remote controller's Multi-Aircraft Control mode
can be used to coordinate the operation of up to five aircraft at the same time, enabling pilots to work more
efficiently. Replaceable batteries can be easily hot-swapped and the antennas are easily removable for quick
maintenance.
1. Power Button
2. RTH Button
3. Control Sticks
4. Speaker
5. Lanyard Attachment
6. Status LED
7. Battery Level LEDs
8. USB-C Port
9. 3.5 mm Audio Jack
10. MicroSD Card Slot
11. Display Device
12. Sleep/Wake Button
13. Antennas
14
16
18
17
The figure below shows the function that each control stick movement performs, using Mode 2 as an
example. The left stick controls the aircraft's altitude and heading, while the right stick controls its forward,
backward, left and right movements. The gimbal dial controls the camera's tilt.
Left Stick
Turn Left
* The remote controller is able to reach its maximum transmission distance (FCC) in a wide open area with no Electro-
Magnetic Interference, and at an altitude of about 400 feet (120 meters).
3
1
6
8
7
9
14. Gimbal Dial
15. Aircraft Control Switch Dial
15
16. Record Button
17. Pause Switch
19
18. Shutter Button
19. Reserved Button
Right Stick
Up
Down
Turn Right
12
11
4
5
2
10
20. Button C1 (customizable)
21. Button C2 (customizable)
22. Battery Compartment Cover
23. Battery Compartment Cover Lock
24. Dongle Compartment Cover
Forward
Backward
Left
13
21 20
22
23
24
Gimbal Dial
Right
3