Technical Data - Parkside Pasa 20-Li D3 Mode D'emploi

Masquer les pouces Voir aussi pour PASA 20-Li D3:
Table des Matières
Les langues disponibles

Les langues disponibles

˜ Technical data
20V Cordless
Garden Saw
Rated voltage:
Rated idle stroke
rate n
:
0
Stroke length:
Max . cut length:
Saw blade holder:
Recommended ambient temperature
While charging:
During operation:
During storage:
Noise emission value
Noise measurement value determined in
accordance with EN 62841. The A-rated
noise level of the power tool at the
working location is typically as follows:
Sound pressure level L
Uncertainty K
:
pA
Sound power level L
Uncertainty K
:
WA
WARNING!
m
Wear hearing protection!
Vibration emission value
Total vibration values (vector total
of three directions) determined in
accordance with EN 62841:
Sawing chipboard a
Uncertainty K:
Sawing wood beams a
Uncertainty K:
8
GB/IE/NI
PASA 20‑Li D3
20 V
0-2700 min
-1
20 mm
60 mm (with
branch claw)
90 mm (without
branch claw)
½" (12.7 mm)
+4 °C to +40 °C
+4 °C to +40 °C
+20 °C to +26 °C
:
79.3 dB
pA
5 dB
:
87.3 dB
WA
5 dB
:
3.842 m/s
h,B
1.5 m/s
: 3.731 m/s
h,WB
1.5 m/s
NOTE
The vibration emission values and
u
the noise emission values given
in these instructions have been
measured in accordance with a
standardised test procedure and
can be used for comparison of the
power tool with another tool .
The specified total vibration values
u
and the noise emission values can
also be used to make a provisional
load estimate .
WARNING!
m
Depending on the manner in which
u
the power tool is being used and,
in particular, the kind of workpiece
being worked, the vibration and
noise emission values can deviate
from the values given in these
instructions during actual use of
the power tool .
It is necessary to establish safety
u
measures to protect the operator
based on an estimation of the
vibration load during actual use
(wherein all states of operation
must be included, e .g . times when
the power tool is switched off
and times where the power tool is
switched on but running without
load) .
Charging time
The product is part of the
o
X 20 V TEAM series from Parkside
and can be operated with battery
packs of the X 20 V TEAM series
from Parkside . Battery packs of
the X 20 V TEAM series may only
2
be charged using chargers of the
2
X 20 V TEAM series .
2
2
Table des Matières
loading

Ce manuel est également adapté pour:

465834 2404

Table des Matières